How does it work?

Attention! Always check if your watch is waterproof and make sure the crown is turned all the way!

1. Spray the Cleaning Spray directly onto the watch and the steel strap. Spray generously so that the liquid can loosen the dirt well. (If your watch is very dirty, rinse it under the tap first).

2. Use the CyW brush to clean the watch thoroughly.

3. After step 2, if your watch is very dirty, rinse it first under the tap or in a bowl of lukewarm water. Repeat steps 2 and 3 until all the dirt is gone.

4. Dry the watch with the long fiber side of the soft nano cloth.

5. Spray the Shine&Protect Spray on the watch and let it work for 10 seconds.

6. Use the short fiber side of the CyW Nano Cloth to dry and polish to a radiant result.